Komut
receive()
Açıklama
Alımı etkinleştirir.
Sözdizimi
RS485 .receive ()
Parametreler
Yok
İadeler
hiçbir şey değil
Misal
/*
RS485 Receiver
This sketch receives data over RS485 interface and outputs the data to the Serial interface
Circuit:
- MKR board
- MKR 485 shield
- ISO GND connected to GND of the 485 device
- A connected to A/Y of the 485 device
- B connected to B/Z of the 485 device
- Jumper positions
- FULL set to ON
- A \/\/ B set to OFF
created 4 July 2018
by Sandeep Mistry
*/
#include <ArduinoRS485.h>
void setup() {
Serial.begin(9600);
while (!Serial);
RS485.begin(9600);
// enable reception, can be disabled with: RS485.noReceive();
RS485.receive();
}
void loop() {
if (RS485.available()) {
Serial.write(RS485.read());
}
}
RS485 Receiver
This sketch receives data over RS485 interface and outputs the data to the Serial interface
Circuit:
- MKR board
- MKR 485 shield
- ISO GND connected to GND of the 485 device
- A connected to A/Y of the 485 device
- B connected to B/Z of the 485 device
- Jumper positions
- FULL set to ON
- A \/\/ B set to OFF
created 4 July 2018
by Sandeep Mistry
*/
#include <ArduinoRS485.h>
void setup() {
Serial.begin(9600);
while (!Serial);
RS485.begin(9600);
// enable reception, can be disabled with: RS485.noReceive();
RS485.receive();
}
void loop() {
if (RS485.available()) {
Serial.write(RS485.read());
}
}