get()

Açıklama

EEPROM'dan herhangi bir veri türünü veya nesneyi okuyun.

Sözdizimi

EEPROM.get (adres, veriler)

Parametreler

adres: 0'dan ( int ) başlayarak okunacak yer

data: okunacak veriler, ilkel tip (örn. float ) veya özel bir yapı olabilir

İadeler

Aktarılan verilere referans

Misal

#include <EEPROM.h>

struct MyObject{
float field1;
byte field2;
char name[10];
};

void setup(){

float f = 0.00f; //Variable to store data read from EEPROM.
int eeAddress = 0; //EEPROM address to start reading from

Serial.begin( 9600 );
while (!Serial) {
; // wait for serial port to connect. Needed for Leonardo only
}
Serial.print( "Read float from EEPROM: " );

//Get the float data from the EEPROM at position 'eeAddress'
EEPROM.get( eeAddress, f );
Serial.println( f, 3 ); //This may print 'ovf, nan' if the data inside the EEPROM is not a valid float.

// get() can be used with custom structures too.
eeAddress = sizeof(float); //Move address to the next byte after float 'f'.
MyObject customVar; //Variable to store custom object read from EEPROM.
EEPROM.get( eeAddress, customVar );

Serial.println( "Read custom object from EEPROM: " );
Serial.println( customVar.field1 );
Serial.println( customVar.field2 );
Serial.println( customVar.name );
}

void loop(){ /* Empty loop */ }

Komut